northernguy
Member
- Joined
- Oct 17, 2008
- Messages
- 33
Is there a spray can match for frame gray on a mitts 160d,blue and white also
would be nice?
would be nice?
Paint match
- Thread starter northernguy
- Start date
- Views: 1604
PILOON
Super Star Member
Tremclad Med Blue is what I use for the blue and it's available in spray as well as qts.
OP
northernguy
Member
- Joined
- Oct 17, 2008
- Messages
- 33
Grey is the color I really need,I,ve just built a front bumper that I can add weight inside as nessasary and would like it to match the frame color,thanks for the blue match,i'll check it out,the foot plate area could use a little touth up.
DieselPower
Elite Member
- Joined
- Sep 30, 2006
- Messages
- 2,756
- Location
- Fairfield, PA
- Tractor
- JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170
If you go to a real paint shop that sells body shop automotive paints they can do a analysis of a sample and mix up a exact matching paint and put it in spray cans.
OP
northernguy
Member
- Joined
- Oct 17, 2008
- Messages
- 33
Last time I had a can mixed at my local napa ,it cost about 30$.Problem
is my mitts is 3 hours away in northern ont,under 3 to 4 feet of snow sleeping untill aprill,so bringing in a piece of it for a color match is not going to happen to soon.Many of the small case parts are the same ,I wonder if the frame color is a match,but a simple, readially avalible, cheap spraybomb is what i'm looking for.Ive seen some earlier post on the blue (ford grabber or ford engine) and Mr Piloon's reply but I don't recall the gray,I'll look back again.
is my mitts is 3 hours away in northern ont,under 3 to 4 feet of snow sleeping untill aprill,so bringing in a piece of it for a color match is not going to happen to soon.Many of the small case parts are the same ,I wonder if the frame color is a match,but a simple, readially avalible, cheap spraybomb is what i'm looking for.Ive seen some earlier post on the blue (ford grabber or ford engine) and Mr Piloon's reply but I don't recall the gray,I'll look back again.