CO_Farmer
Member
I recently purchased a used 7800HST to replace my DOA Yanmar.
While checking fluids, I noticed the hydraulic/tranny fluid is maybe an inch above the full mark on the dipstick. Darn hard to see until I sprayed the stick with some flat black. Should I drain the excess out, or is there no harm done by leaving it? Seals, gaskets, etc.
While checking fluids, I noticed the hydraulic/tranny fluid is maybe an inch above the full mark on the dipstick. Darn hard to see until I sprayed the stick with some flat black. Should I drain the excess out, or is there no harm done by leaving it? Seals, gaskets, etc.
Last edited:
