out with the 4410, in with the 3520

[bud4410]

i just traded in my 4410 with attachments in on a new 3520 with 72D mmm, 300cx fel, and 366 front blade. the 72D deck with auto connect really seems to work neat and the 366 blade with the front hitch should save me a lot of wrenching to change from fel-mmm to front blade and back or any combination of the attachments just pulling pins and not laying on my back under the machine. if anyone is interested i have some goodies left over from the 4410. tech manual- parts manuals-tricycler mulch kit and set of larrys mower deck axels for the 72" deck. email me at budhurley@hotmail.com if interested. i hope i enjoy the 3520 as much as i did the 4410 and the 955 before that. never once did either ever have to go back to the dealer for any kind of repair work. thanks for your time. cheers, bud

 

[beenthere]

HP of the two about the same? ...or a bit more on the 3520?

Would like to hear more about the auto connect on the new deck. Some pics too would be great.

Might look on YouTube to see if there are some videos of hooking up that deck. Seems it could be pretty handy.

The Deere FEL's can't get much handier than the 430 I have on my 4300, but getting off to disconnect the hyd. couplers is a little tiering (not!)

 

[Nuru]

Yeah those 300Cx's are pretty easy to go on and off. Just make sure you do it on a flat surface.