Mick Oz
Silver Member
- Joined
- Jul 27, 2006
- Messages
- 138
- Location
- Townsville Queensland
- Tractor
- Ferguson TED20 TEF20 DongFeng ZB25
So a junior operator, who was going too fast in the 1100u went through a rough patch of ground and not wearing his seat belt got thown forward into the steering wheel.
That taught him a lesson, but my problem is that he grabbed the shuttle shift and pulled it from forward to reverse.
Now the tractor wil start and run but will not select forward or reverse. I can geet it in and out of gear an high and low range, but shuttle shift might aswell not be there. They had to tow it back to me at the work shop.
The dealer wants about $200+ for travel time and another $180 to hook up a Case diagnostic tool. Then the real cost starts to show.
Any suggestions?
That taught him a lesson, but my problem is that he grabbed the shuttle shift and pulled it from forward to reverse.
Now the tractor wil start and run but will not select forward or reverse. I can geet it in and out of gear an high and low range, but shuttle shift might aswell not be there. They had to tow it back to me at the work shop.
The dealer wants about $200+ for travel time and another $180 to hook up a Case diagnostic tool. Then the real cost starts to show.
Any suggestions?
