I just bought a pretty new drum mower, a Massey # 3 baler, and an old Massey rake to bale the couple of acres of hay I ahve for the soon to be horses. I baled 15 bales the other day and everything did ok after a little tweeking. My question is can I convert the hale baler to a PTO driven. It has the old Wisconsin two cylinder motor on it. That thang is a pain to get restarted after a little use. Also would like to find an owners manual for it. Thanks! TC
Old hay equipment
- Thread starter tjse9006
- Start date
- Views: 914
Verticaltrx
Veteran Member
- Joined
- Dec 30, 2009
- Messages
- 1,908
- Location
- VA
- Tractor
- Kubota B3200/L2501/SVL65-2/U35-4, IH 454/656, Ford NAA, Case 1845C/480E/450C LGP
If you are pulling the baler with a JD 2720 your best bet is to leave the baler as an engine driven unit. A compact tractor that size would be marginal at best power wise, and the lunging of the baler could wreck the PTO and driveline on a small tractor.
flusher
Super Member
- Joined
- Jun 4, 2005
- Messages
- 7,572
- Location
- Sacramento
- Tractor
- Getting old. Sold the ranch. Sold the tractors. Moved back to the city.
I agree with Verticaltrx. Keep the Wisconsin and fix the problem with that engine. Sounds like a simple carburetor adjustment or a carb rebuild is all that's needed.
Agco handles Massey Ferguson products. Look at their publications website for manuals
https://www.agcopubs.com/
Good luck.
Agco handles Massey Ferguson products. Look at their publications website for manuals
https://www.agcopubs.com/
Good luck.
