Old 3PH question.

[Ronster]

I'm know this is an old question, but I can't find it in the archives. Does the 1/4 inching valve on the B7610 and B7800 have an adjustment for the "up'" speed? /forums/images/graemlins/confused.gif The 3PH seems to shoot up real fast if you bypass the 1/4 inch feature. Also, has anyone found extendable lower links/stabilizers that will fit these machines?
Ronster

 

[ronjhall]

I don't beleive the speed up is adjustable.
Here is a thread on the lower links that fit a B2910. Click Here They will fit the B7800 with no problems.
You can also use Pat's Easy Change for the ends. They do add some length to the arms though.

 

[Ronster]

ronjhall,thanks for the info. I was looking at the parts list for a B7610/ and wondwered if you could swap the 3PH control vavle on a B7610 or B7800 with another vavle from a different Kubota? If so, I'll bet they're not cheap$$$.
Ronster