Old 35 clutch release fork parts help

   / Old 35 clutch release fork parts help #1  

mwb

Platinum Member
Joined
Feb 28, 2008
Messages
650
Location
Ottawa Ont Canada
Tractor
3940HST Montana
I am fixing a late 50's 35 for a neighbour; he buggered up the clutch after splitting the tractor and it ate the release fingers, release bearing, bearing carrier and the release forks. I have sourced replacement parts except for the release fork (that attaches to the clutch pedal). The stamping number on the part is 181-459-M1 and matches the parts list I have for a 35 DeLuxe.

This part is not available anywhere I have looked; I have also searched for a generic "MF 35 release fork" and found a part number 886719M1 that is described as fitting many models... does anyone have advice for me? I can weld the old one to build it back up but would much rather fix it right.
 
   / Old 35 clutch release fork parts help #2  
When I put in your part number without the dashes it pops up at Wengers....


Might be your best bet!
 
   / Old 35 clutch release fork parts help
  • Thread Starter
#3  
Thank you! (y)
 

Tractor & Equipment Auctions

New/Unused 12ftx20ft Steel Carport (A48837)
New/Unused...
2003 International 4300 Flatbed Truck w/ Liftgate - Inoperable - 7.6L DT466 Diesel Engine (A50397)
2003 International...
2004 20ft Explorer Pontoon Boat and Trailer (A48837)
2004 20ft Explorer...
LOWRY 5' DISC HARROW (A50459)
LOWRY 5' DISC...
8050 (A48837)
8050 (A48837)
2019 CATERPILLAR 279D SKID STEER (A50458)
2019 CATERPILLAR...
 
Top