I own a New Holland TN75DA. I am hvaing some erratic problems with my oil pressure light so I need to check the pressure with a manual gauge. I purchased a guage with multiple adaptors at an automotive shop but none of the adaptors work. Does anyone know of a tester kit that does provide an adaptor to fit a TN75DA or by change know the thread and size of the oil pressure port.
Oil Pressure Tester
- Thread starter Polo
- Start date
- Views: 1240
You probably need a metric adapter kit. SunPro makes one. You can find it cheaper than the suggested price of $9.99.http://www.sunpro.com/product_detail.php?pid=16338&PHPSESSID=ab6bea3b69db54646d933b7f1909ac98
Last edited:
LRH
Silver Member
- Joined
- Oct 3, 2005
- Messages
- 229
- Location
- GA USA
- Tractor
- '97 NH Boomer 1925 HST 4WD, // Kubota B3030 HSTC
Quite a few non US engines do not use tapered pipe thread; instead using straight thread (6MM, 8MM) with a O ring or copper washer at the shoulder to seal. To ID the hole try some metric bolts 6MM X1.0 or 1.25 or 8MM x 1.25 or 1.5, or as said above, find one of the assortments
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Ditto on the sunpro set.. i got one at auto zone.. etc.
Soundguy
Soundguy
