oil change issue
- Thread starter Professor Marvel
- Start date
- Views: 2611
Cpjlube
Silver Member
It's not just small diesels. Some cars need to be added to slowly also.
Adding oil to a VW VR6 engine quickly with a bulk oil pump can be a recipe for disaster. Unless oiling your airfilter, snorkel and spark plugs was the plan......
As stated before, add slowly and check the stick. The small mitsubishi diesel engines need a slower fill also.
Adding oil to a VW VR6 engine quickly with a bulk oil pump can be a recipe for disaster. Unless oiling your airfilter, snorkel and spark plugs was the plan......
As stated before, add slowly and check the stick. The small mitsubishi diesel engines need a slower fill also.
Sodo
Elite Member
- Joined
- Apr 21, 2012
- Messages
- 3,308
- Location
- Cascade Mtns of WA state
- Tractor
- Kubota B-series & Mini Excavator
Interesting post !
That was a design horror story that applied to a specific New Holland engine (in a 2006 TC40DA tractor ). Due to a design error, pouring oil in at a normal rate, oil could back up and some oil could go down the crankcase vent, into the intake tract, then onto a piston. Upon starting the engine, an unlucky piston encounters a slug of oil at the top of its stroke, hydro-locks and major internal engine parts are damaged.
Slow filling was key to dealing with a specific tractor model with a specific design error. Slow filling into other engines is not a logical action. The takeaway from SHADE TREE WELDER's experience is to learn exactly what year and model had this problem, and decide whether your tractor has this same design error (very very UNLIKELY). If you have the same year/model then fix the problem with newer oil filler parts and wipe it off your list of concerns. I think another poster stated that his 2007 model had a different oil filler parts & method.
Don't add useless ritual to a simple task like oil change. Unless you enjoy ritual, which I'm not against per se
I'm all for useless ritual in woodworking!
Agreed some engines have "procedures" though, such as dry-sump systems etc. and there are "full filter" and "empty filter" issues. I may have to backpedal a little. But how to decide if this ought to be a worry? One indication is, if your oil filler is on the valve cover, and you can see valve tappets, pour like ****!
All this IMHO of course.
That was a design horror story that applied to a specific New Holland engine (in a 2006 TC40DA tractor ). Due to a design error, pouring oil in at a normal rate, oil could back up and some oil could go down the crankcase vent, into the intake tract, then onto a piston. Upon starting the engine, an unlucky piston encounters a slug of oil at the top of its stroke, hydro-locks and major internal engine parts are damaged.
Slow filling was key to dealing with a specific tractor model with a specific design error. Slow filling into other engines is not a logical action. The takeaway from SHADE TREE WELDER's experience is to learn exactly what year and model had this problem, and decide whether your tractor has this same design error (very very UNLIKELY). If you have the same year/model then fix the problem with newer oil filler parts and wipe it off your list of concerns. I think another poster stated that his 2007 model had a different oil filler parts & method.
Don't add useless ritual to a simple task like oil change. Unless you enjoy ritual, which I'm not against per se
I'm all for useless ritual in woodworking!Agreed some engines have "procedures" though, such as dry-sump systems etc. and there are "full filter" and "empty filter" issues. I may have to backpedal a little. But how to decide if this ought to be a worry? One indication is, if your oil filler is on the valve cover, and you can see valve tappets, pour like ****!
All this IMHO of course.
Last edited:
LarryD
Veteran Member
Here is the original (?) post discussing this problem. The attachments in post one are what you're looking for.
It appears your TC45D isn't one of the "ISM" engines.
http://www.tractorbynet.com/forums/new-holland-owning-operating/188532-tc40da-oil-change-nightmare.html
It appears your TC45D isn't one of the "ISM" engines.
http://www.tractorbynet.com/forums/new-holland-owning-operating/188532-tc40da-oil-change-nightmare.html
OP
Professor Marvel
Platinum Member
- Joined
- Oct 16, 2010
- Messages
- 855
- Location
- Virginia near Culpeper
- Tractor
- Ford 5000, Kubota 2150 HST, NH TC45 D, JD 375 Baby Skid Steer --- STUFF THAT GOES ON EM, Schwinn Stingray
Thanks everybody
I can change my oil now without reservation
I can change my oil now without reservation
