joro2548
New member
Have a NX6010 HST and for the past two years it will cut out of forward motion like a (tranny that would slip into neutral on a car) , however the engine rpm stays at full throttle. Won't go forward or backward. When I take my foot off the peddle and let the rpm's go to idle and wait for 10 to 15 seconds, then re engage the forward petal , it will go again. Generally happens under load but not always. This is an intermittent problem that the dealer has tried to fix but to no success so far. Thought a full 100 hr service would help but to no avail. Any ideas? Of course it NEVER happens at the dealer ( where it is right now)
Frustrated in Minnesota
Frustrated in Minnesota
