Needing help. I have a 2018 cub cadet challenger 750. I had to replace the starter gear due to a couple of broken teeth. After putting it all back together, I am getting absolutely no electrical power. I have checked the battery and it is good. I checked the fuses in the fuse box and they are all good. Have retraced all connections and they are all connected. Can’t find a good electrical diagram that shows connections and color code. Anyone have a similar issue?
TractorTech
Elite Member
- Joined
- Jan 26, 2012
- Messages
- 2,772
- Location
- California
- Tractor
- Ford 7710, Ford 550, Ford 1910, Ford 4430, KD Forklift, Ford LGT17H, New Holland L255 Skidsteer
Welcome to TBN!
I assume you have power to the starter lug from the battery. Have you looked to see if one of the wires off of that lug is a fusible link and disintegrated, but insulation is intact?
I assume you have power to the starter lug from the battery. Have you looked to see if one of the wires off of that lug is a fusible link and disintegrated, but insulation is intact?
Tx Jim
New Member
Check, clean, tighten all four(4) battery cable connections. It's ls also possible fusible link has failed.
