no 3 point

/ no 3 point #1  

jimandapril97

New member
Joined
Dec 20, 2008
Messages
5
We have a dongfeng/field pro 354 and the 3 pt hydraulics quit working. The loader and bucket still work though. Is there some kind of safety cutoff for the 3 pt - any other ideas?
Jim
 
/ no 3 point #2  
More info please. Do the lift arms go up but not down? Down but not up? Both? Neither?

//greg//
 
/ no 3 point #3  
Does it have a lowering speed regulating valve down in front of the seat? If so could this be screwed all the way closed? On my Jinma, this will shutoff fluid to the 3PH lift cylinder(and send pressure to the half remote).

Are you trying to lift any load? Most control valves have some sort of safety relief to protect the structure if you bounce the tractor over rough terrain with a heavy impliment in the air. Could be this got activated by trying to lift too much, or a hard bounce, and never fully closed?

Not familliar with your machine. What kind of pump/s does it have? Any driven off the PTO that could have been disengaged? Just guessing without more info...
 
/ no 3 point #4  
You can contact Chip at Artrac Tractors in Ark. he is a DF dealer,I'm not sure if DF uses the same hydraulic lift box as Jinma,or if you can post some pic's of your lift box maybe we can help
Tommy
Affordable Tractor Sales
 
/ no 3 point #5  
does it have draft control, if so, have you ever hooked a chain up to it to pull/jerk any load?
 
/ no 3 point #6  
We have a dongfeng/field pro 354 and the 3 pt hydraulics quit working. The loader and bucket still work though. Is there some kind of safety cutoff for the 3 pt - any other ideas?
Jim

As Greg said, need a little more info. Is yours a newer model with rear remotes? I have a newer DF354 and sometimes I have either forgot or by accident flipped a control for one of the remotes making the 3pt inoperable as it is diverting flow to the remote from the 3pt. Even flip the remote levers around , maybe one valve is a little stuck and may need a little pressure bump to get it activated. Sounds like a flow problem somewhere. Or check the adjustment screw under the seat and adjust as needed. Fluid level? may be another. The DF has a common hydraulic tranny reservoir. Check the simple things first.

Lets us know. Good Luck

Dave
 

Marketplace Items

20FT X 12FT LIVESTOCK METAL SHED (A58214)
20FT X 12FT...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
T/A Enclosed Trailer (A61569)
T/A Enclosed...
Case 580L 4x4 Backhoe (A61166)
Case 580L 4x4...
2000 Sterling L7501 T/A Drill Rig Truck (A60352)
2000 Sterling...
2022 CORMIDI C85 STAND-ON MINI DUMPER (A62129)
2022 CORMIDI C85...
 
Top