3-Point Hitch NH TN65 year 2000 faults code help needed

[TKAdenmark]

Hi
I have bought a NH TN65V from 2000. It is trying to tell me a error code, think it is 24, followed by 35. It is with the electric controlled lift(3 point hitch).
The blinking is on the right fender.
Does anyone have the right repair manual? And sharing
I did find a repair manual on eBay, but not sure it is the right one! It is stamped November2002, is it for at 2000 traktor or a newer version? So I have not ordered it yet!
Hope some of you can help!

Thomas from Denmark

 

[RickB]

TN's marketed in North America do not have Electronic HPL. But error code 24 was used across all NH platforms at the time to denote a controller that needs to be calibrated. If the 2002 manual says TN65V you should be good to go. If not for a 'V' configuration, I would pass.

You can identify the proper manual here; even purchase and download.

http://www.dmcretail.com/productSearch.aspx

 

[TKAdenmark]

Hi RickB
Your link is not working, or is it just me?(first link is working, but not the link on the page)
The repair manual is in US, and I think the manual is always just saying TN65 -TN90, no letter after.
The V is "special tractor"

 

[TKAdenmark]

Now it is working. No repair manual for TN65, but i found it on eBay. So if anyone needs it in the future, just write me. krogh@andersen.mail.dk