NH 3040 fuse# 5 cruise control/Range shift

   / NH 3040 fuse# 5 cruise control/Range shift #1  

MscottM 16

New member
Joined
Oct 21, 2017
Messages
3
Location
South Boardman, Mi
Tractor
New Holland 3040
The 7.5 amp fuse started blowing awhile back. I have just been changing it out. Sometimes it lasts a few days, other times about 15 minutes. Any suggestions that I may be able to try before I send it off to the Dealer?

Thanks
 
   / NH 3040 fuse# 5 cruise control/Range shift #2  
It has a short in the harness. If it’s under warranty, Let the dealer find and fix it.
Best you could do is patch it up. Let the dealer replace the harness.
 
   / NH 3040 fuse# 5 cruise control/Range shift
  • Thread Starter
#3  
Unfortunately it is no longer under warranty. How difficult is it to get to the wires? I have more free time in the winter and considered trying to follow the wires, but not sure what I would have to disassemble to do it.
 
   / NH 3040 fuse# 5 cruise control/Range shift #4  
Unless it has a cab, tractor wiring is pretty simple. You shouldn’t have to remove much more than access panels for the dash.
 
   / NH 3040 fuse# 5 cruise control/Range shift
  • Thread Starter
#5  
2018-07-17 19.30.12.jpg

finally figure it out. Started blowing the fuse every time I raised the bucket. The wire going to the high low switch in the joy stick was getting pinched and shorted out every time it touched metal
 

Tractor & Equipment Auctions

1986 Betenbender 175 Ton 10 Ft Press Brake (A59213)
1986 Betenbender...
Kuhn FC400RG (A60462)
Kuhn FC400RG (A60462)
2015 Toro Z Master 6000 Series 60in Zero Turn Commercial Mower (A59228)
2015 Toro Z Master...
2007 KOMATSU GALEO D39PX-21 CRAWER DOZER (A60429)
2007 KOMATSU GALEO...
2018 HINO SA (A58214)
2018 HINO SA (A58214)
2006 Acura RL Sedan (A59231)
2006 Acura RL...
 
Top