New tractor - No bueno
- Thread starter MoccasinGap
- Start date
- Views: 3059
atsah
Elite Member
What was it rubbing against?
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,787
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Tire de-rimmed most likely because tire was not inflated to spec when serviced prior to delivery. This usually occurs on front tires because steering stresses the sidewalls.
Its not the tractor. It was the service person.
Its not the tractor. It was the service person.
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,159
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
RK is probably going to say that over 2 weeks YOU should have noted the tire pressure.
OP
MoccasinGap
New member
Who would I take it to for repair?
DK35vince
Super Member
Its RK's responsibly to maintain the air pressure in the tires ???
How do you know the OP didn't run over something causing the flat.
Pop the tire back on the rim and go.
Last edited:
atsah
Elite Member
Looks like the tire was scrapping against something, my sidewalls don't look as bad as that one does with 300 hours..
OP
MoccasinGap
New member
Good morning all, good call on the tire. Took it off this morning found a huge nail on the bottom we couldn稚 see until it was off. Repaired and tractor mom is back at it.
uptaker73
Silver Member
- Joined
- Feb 2, 2005
- Messages
- 127
- Location
- Morganton, NC
- Tractor
- RK 37, John Deere LX280 John Deere Z535m John Deere 160
A tire issue can happen at anytime, no matter how many hours. Can you describe the conditions the tractor was under when it happened? It's an easy fix with the front loader as your floor jack!
Oldoak
Veteran Member
- Joined
- Feb 20, 2013
- Messages
- 1,817
- Tractor
- Kubota L5060GST, J D X758 GT, J D 855D XUV
Yep. Inflate to the correct pressure, if no leaks, move on. If you can't do it yourself, your tractor dealer or any tire shop would be able to seat the tire bead.
Professor Marvel
Platinum Member
- Joined
- Oct 16, 2010
- Messages
- 855
- Location
- Virginia near Culpeper
- Tractor
- Ford 5000, Kubota 2150 HST, NH TC45 D, JD 375 Baby Skid Steer --- STUFF THAT GOES ON EM, Schwinn Stingray
Yes that usually happens
will also stop runnng if you don't put fuel in
will also stop runnng if you don't put fuel in
DK35vince
Super Member
That's what they look like when run flat
atsah
Elite Member
I guess..
Jchonline
Elite Member
- Joined
- Feb 19, 2018
- Messages
- 3,089
- Location
- Red Feather Lakes, CO
- Tractor
- Kubota L6060, KX040-4, M7060, X1100C, M62(S)
To answer the OP’s question...yes if you run over a big nail!
OP
MoccasinGap
New member
Thank you for all of your info. Yes, it was a big nail and no it was not rubbing on anything. I think what looks like rub is Georgia clay.
Tennsawdust
Gold Member
A set of Harbor Freight tire irons and some boot plugs can save you some downtime. I also have the manual tire change stand, which was $35 well spent. Taking a tire into town would be a minimum of two hours for me so it has really saved me some time.