New Diamond C FMAX 212 flatbed trailer.

   / New Diamond C FMAX 212 flatbed trailer. #31  
Agree with the above posts. I need to research what will fit in my trailer toolbox, too. Its a little smallish for a battery, pump, switch, hoses, et al.
On the slower setting I can jack trailer up no problem, even with 13 tons of hay on it. Just takes a while

Still think the budget way is a rechargeable 1/2 electricians hole hawg, socket fitting and an adapter. But then I dont understand what to do if the drill breaks or dies....how to adapt the handle to fit back on in an emergency?
I sent you a PM, but I came across this company while being curious about your trailer jack issue. Heavy duty hydraulic and an electric crank for 2 speed jacks. And they seem to be located in PA. I have no association with the company just so it's clear, so I can't say if they are quality, dependable or anything positive. But I can't say anything negative either since i don't know anything about them.

Dropleg Jacks, Hydraulic Jacks, and Landing Gear
 
   / New Diamond C FMAX 212 flatbed trailer. #32  
Thanks. Will look into it. :thumbsup:
 
   / New Diamond C FMAX 212 flatbed trailer.
  • Thread Starter
#33  
Just got back with the new trailer. Exactly 48 hrs, 1350 miles. The dealer claims that trailers have went up 17% since I placed my order in December, 16 weeks.

Diamond C was having trouble with the "Will Pops" so they are using Cooper now, made in China. They look good tho.

0420211335.jpg
0420211133.jpg
0420211134.jpg
 
   / New Diamond C FMAX 212 flatbed trailer. #34  
I picked mine up late last year from Spencer Trailers. I looked long and hard before deciding on the Diamond C over Load Trail and PJ. Those were really the only other ones in the running. I also swapped the coupler for a Shocker... I am very pleased with the purchase.

Diamond C.jpg
 
   / New Diamond C FMAX 212 flatbed trailer. #35  
These Diamond C trailers are legit. I picked up a very lightly used 2021 FMAX210 today and in my opinion it is the best made trailer on the market. I have owned Lamar, PJ, Big-Tex, Load Trail, Maxey and others and this thing is just a step above.
 
   / New Diamond C FMAX 212 flatbed trailer. #36  
These Diamond C trailers are legit. I picked up a very lightly used 2021 FMAX210 today and in my opinion it is the best made trailer on the market. I have owned Lamar, PJ, Big-Tex, Load Trail, Maxey and others and this thing is just a step above.
Did you purchase from an Individual or a dealer? What area or Dealer?
 
   / New Diamond C FMAX 212 flatbed trailer. #37  
Individual in west texas.
 
   / New Diamond C FMAX 212 flatbed trailer. #38  
Nisaacs your trailer looks very nice. What's the empty weight? how much can it carry tare? i am looking at a similar setup just 8' bed on my ram. Not sure on the 17.5 singles or 17.5 duals.
thanks,
Deo
 
   / New Diamond C FMAX 212 flatbed trailer.
  • Thread Starter
#39  
Thanks Deo.

Deo, it weighs 6k, with a 16k gvw, so 12k net load plus pin weight.
 

Tractor & Equipment Auctions

2010 FORD F150 WORK PICKUP TRUCK (A51222)
2010 FORD F150...
1973 SHOP MADE PROPANE TRAILER (A50854)
1973 SHOP MADE...
2013 BMW X5 xDrive50i AWD SUV (A50324)
2013 BMW X5...
2002 NEW HOLLAND 4X4 TN75S TRACTOR (A51243)
2002 NEW HOLLAND...
2017 MACK CHU613 TANDEM AXLE SLEEPER (A51222)
2017 MACK CHU613...
2016 CATERPILLAR 335FL CR EXCAVATOR (A51242)
2016 CATERPILLAR...
 
Top