I've got a jd 110 tlb and have never used the pto on it so I put a brush hog on it and pulled the pto switch and nothing. Does it sound like a bad switch or am I going to have to dig deeper or is there a step that I'm missing. By the way the pto light does come on on the console. Thanks
New and don't know how the pto works on 110 tlb
- Thread starter Dlott1966
- Start date
- Views: 2921
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,590
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
kennyd
Advertiser
If its never been used, the PTO solenoid could be stuck.
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,839
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day Mate.
What revolutions have you brought the engine up to prior to engaging the PTO switch?
Do you have an Owner Manual?
--------
I just saw your other thread and you've said that the PTO switch is bad. Hopefully that's the answer and you'll let us know.
Enjoy the site.
What revolutions have you brought the engine up to prior to engaging the PTO switch?
Do you have an Owner Manual?
--------
I just saw your other thread and you've said that the PTO switch is bad. Hopefully that's the answer and you'll let us know.
Enjoy the site.
Last edited:
