Need to know part number or attributes of bolt

[duanekeys]

I was looking over my dk40se this evening and noticed I lost a bolt. Does anyone know the size and other important attributes (or part number) for the bolt that keeps the lower link connected to the tractor?

There is a brass-looking sleeve that looks like the sleeves that surround the loader zerks that is actually taking the weight of the lower link, I just need the bolt that keeps that sleeve from sliding out and allowing the lower link to come free from the tractor.

Thanks!

 

[MotorSeven]

An actual picture would help. It's most likely a pin with a square head. I have lost several off the lower linkage arms even with locking hairpin clips on them and am going to switch to a graded bolt, washer & a nylocks nut in the future.

 

[Coyote machine]

There's a Kioti dealer :http://www.paigetractors.com/parts_01.asp
Search for the part # there or call them and have them look it up for you.

 

[yuccafarmer]

Isn't there a pin/bolt on the other link that could be used as an example of what to get?

 

[murphy1244]

Thats why I always buy the parts book with the service manual.

 

[wallace]

What number you need?

 

[Coyote machine]

Thats why I always buy the parts book with the service manual.

Don't need no stinkin' parts book when u got free access to the diagrams!:thumbsup::laughing:

 

[duanekeys]

What number you need?
<img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=248076"/>

Part 28, thanks Wallace!

 

[MotorSeven]

Part 28, thanks Wallace!

Ahhh, yes I have managed to lose two of those along with number 27. I used blue loctite on them now, so far so good.

 

[duanekeys]

Got the bolt for $1.16 from my (not so) local dealer. Thanks for the help!