I have a Case IH DX55 tractor (same as TC55DA). The clutch is just about gone at 700 hours. In 'high' the tractor doesn't really move, there is no more adjustment in the clutch pedal. In Low, it still works. In Medium, it kinda works as long as you are in 1, 2, or 3. 4 is ok as long as you arent at 2000 RPM. It will never engage. If you let it keep trying, you will smell the clutch.
I need the shop manual sections on how to replace this clutch. Does anyone have it? It is NOT EHSS.
I need the shop manual sections on how to replace this clutch. Does anyone have it? It is NOT EHSS.
