Front-End Loader Need measurement on Bush Hog Loader SSQA models M246, M346, M446, M556, or M300

[b6200hst]

Hello,

I am gathering all the parts to build a Skid Steer Quick Attach for the loader on my McCormick GX45. I found the latch parts (latch handles, locking pins, springs) in my price range and purchased them. The parts are for Bush Hog SSQA's that fit Bush Hog models M246, M346, M446, M546, and M300 loaders. What I need is the measurements for the pivot pin that the latching handles pivot on, so that I can weld the pivot on my adapter in the correct location. I would need the distance from the center of the pivot down to the bottom of the adapter, where it would contact an implement. Any pictures would also be appreciated.

Thanks,

Mark

 

[Xfaxman]

Is this what you are building? https://store.germanbliss.com/bush-...teer-quick-attach-assembly-p-n-50100767-parts

The important thing is that the rod pushing down on the latch pin goes over center, when the handle is all the way down.

Read this thread: http://www.tractorbynet.com/forums/attachments/270316-quick-attach-conversion-kit-need-2.html

 

[b6200hst]

Is this what you are building? https://store.germanbliss.com/bush-...teer-quick-attach-assembly-p-n-50100767-parts

Yes, that is it, I bought the handles and springs from GermanBliss, good company and the best prices. I got some other parts from EBay and the steel from a friend.
Thanks for the info.