Need help with shuttle shift cable /attachment

/ Need help with shuttle shift cable /attachment #1  

RedFirstGen

Silver Member
Joined
Mar 23, 2015
Messages
114
Location
Finger Lakes NY
Tractor
Mahindra 4035
2011 Mahindra 4035. Was using it today when I went to push the shuttle shift forward and it just flopped back and forth between forward and reverse doing nothing. I pulled off the plastic housing around the steering column to try and determine what was going on. What i found--all seemed ok with the cable however it had come detached from the bracket that holds it in place. Everything looked fine with the bracket as well. My problem is Im not sure how the cable attaches to that bracket. It's too big to slide back into the slot or opening that seemingly holds it in place. Any chance anyone has a pic of how it's supposed to be or exeperience dealing with it? Thanks.
 
/ Need help with shuttle shift cable /attachment
  • Thread Starter
#2  
Disregard. I got lucky and found the clip laying on the platform. With that I was able to figure it out.
 
/ Need help with shuttle shift cable /attachment #4  
Make sure that the cable is lubed well while you are at it.
 

Marketplace Items

2017 Ford Fusion Hybrid Sedan (A61574)
2017 Ford Fusion...
JOHN DEERE 1700 - 8R30" VACUUM PLANTERS (A63291)
JOHN DEERE 1700 -...
2017 Ford Escape SUV (A61574)
2017 Ford Escape...
2016 WEILER P385A ASPHALT PAVER (A62129)
2016 WEILER P385A...
CASE TV380 SKID STEER (A64279)
CASE TV380 SKID...
1986 INTERNATIONAL 1900 FLATBED TRUCK (A63291)
1986 INTERNATIONAL...
 
Top