Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,641
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Regarding fuel lines; older fuel lines were NOT designed to run Ethanol gas and can collapse on the inside of the line, restricting fuel flow to zero. So if you have old lines replacing all of them with fuel line designed to handle Ethanol is a good baseline to cover that potential issue. And making sure there is no actual physical restriction of flow from the cap on down to the engine at each location, at the exit from the tank, etc. forward to the entry to the carb.
You will not solve the problem until you isolate it to fuel or electrical. So far, I'm hearing fuel delivery issues....
You will not solve the problem until you isolate it to fuel or electrical. So far, I'm hearing fuel delivery issues....
