racole777
New member
Hello eveyone, new to TBN. Talked to JJ in Fla who has been a big help. He suggested I post the above question so that I might get feedback from other Mahindra owners. My 3525 does not have a remote but does have a FEL. I want to rig a remote myself. My pump supplies the FEL valves/controls in series and terminates in a hose that appears to supply the 3pt/lift. JJ says I need to go from the FEL to the remote to the BH before the 3pt. The BH has 2 hoses on it and a tank. It also has a removeable plug in the top of the 1st valve where the in hose from the tank enters too. I think this plug is where I would connect the remote to the BH. The valves are also in a series and they terminate with an out hose going to the tank. There is also an out hose from the tank that I assume would go to the tank on the tractor. So would the 2nd hose then go to the 3pt? Or the other removeable plug on the 3rd valve on the BH? (see the pic)
