Need a Part Number Please

[KEYBEAR]

What Part Number is the Quick Hitch for a 2016 X-758 .
Going to use it on a 54 inch Blade .

 

[Richard001]

Bear, try going to the manufactures site and ask them.

Pat's Easy Change System Products Page

 

[beenthere]

John Deere Hitch BM26236

 

[hosspuller]

What Part Number is the Quick Hitch for a 2016 X-758 .
Going to use it on a 54 inch Blade .

Your x758 3 point hitch is Cat 1 ...Simply ask for a Cat 1 quick hitch.

 

[beenthere]

I thought the OP was after a hitch for a front blade, maybe the 54" dirt/snow blade. But maybe right that it is a rear blade on a 3ph.

 

[Wagtail]

Your x758 3 point hitch is Cat 1 ...Simply ask for a Cat 1 quick hitch.

Actually it's Cat 0 (limited Cat 1)... which means the OP can use some Cat 1 implements but there'll be an embuggerance regarding getting them on the 3PH.

That being said, a Cat 1 iMatch should fit.

 

[KEYBEAR]

Thanks the part number is what I am looking for .
Yes a front blade I bought a used blade and looking at a used Quick hitch .

 

[hosspuller]

Thanks the part number is what I am looking for .
Yes a front blade I bought a used blade and looking at a used Quick hitch .

Are you looking for a front hitch ? You said "front blade" The quick hitch you linked to is usually for a rear hitch. If it's for a front hitch, I'm surprised to learn about it.

 

[KEYBEAR]

Are you looking for a front hitch ? You said "front blade" The quick hitch you linked to is usually for a rear hitch. If it's for a front hitch, I'm surprised to learn about it.

John Deere is saying I need a QUICK HITCH to use the front blade or snow blower ?

 

[hosspuller]

John Deere is saying I need a QUICK HITCH to use the front blade or snow blower ?

Front quick hitch is p/n BM26236 ... it is the current sub for BM19782

This kit includes a hydraulic cylinder to lift the blade/blower.

 

[beenthere]

Discontinued - Front Quick-Hitch and hydraulic lift (X4/X5 HDGTs, X7s)

Indicates BM26236 is the replacement.

per hosspuller's post that beat mine..