Need a dual spool valve for a belarus 250AS

   / Need a dual spool valve for a belarus 250AS #1  

curtis250AS

New member
Joined
Mar 7, 2015
Messages
5
Location
glencoe alabama
Tractor
Belarus 250AS and John Deere 410E
I have a 250AS I need a dual spool valve for, any information about where to find a new or rebuilt dual spool valve would be greatly appreciated.
 
   / Need a dual spool valve for a belarus 250AS #2  
This is your hyd data.

Hydraulics:
Type: open
Capacity: 2 gal [7.6 L]
Pressure: 2060 psi [142.0 bar]
Valves: 1
Total flow: 4.2 gpm [15.9 lpm]


There are lots of two spool valves available.

I haven't seen very any with a low flow rate.

You might get away with a 8 or 10 GPM.

Surplus Center
 
   / Need a dual spool valve for a belarus 250AS
  • Thread Starter
#3  
Would any of the valves from surplus center hook up to the banjo fittings amd mounting bolts on a 250as? I would want the best one possible.
 

Tractor & Equipment Auctions

Morooka MST 660VD Tracked Dump Truck  Only 30 Hours (A51039)
Morooka MST 660VD...
LINK BELT LB-98 LOG LINE YARDER WITH MOTORIZED CARRIAGE (A51222)
LINK BELT LB-98...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
Komatsu PC138 (A50490)
Komatsu PC138 (A50490)
PALLET OF AIR CHISELS (A50854)
PALLET OF AIR...
2017 Buick Regal Sedan (A50324)
2017 Buick Regal...
 
Top