MT372D injector nozzle gasket

   / MT372D injector nozzle gasket #1  

Rocky98Formula

New member
Joined
Aug 14, 2015
Messages
4
Location
Vancouver, BC
Tractor
Mitsubishi MT372D
Hello everyone,

First time poster on this board which has been an absolutely fantastic resource for tips and tricks in restoring my hand-me-down Mitsubishi MT372D back to top working condition. I'll be posting a thread soon with some pictures and some of my own tips I've learned along the way.

Today, I have a question regarding the gasket that seals the nozzle body to the cylinder head. My KE70 engine starts and runs pretty decent but I notice that there is a considerable amount of combustion gases escaping past the interface between one of the injector nozzles and the cylinder head. I checked the parts manual and I notice that there are 2 gaskets listed and I'm not sure which one I need: K6515430 which is listed as "gasket, nozzle" or K9612280 which is listed as "gasket, chamber". I use the tractor daily on my farm, so ideally I would have all the parts on hand before I start taking things apart. Has anyone replaced the gaskets before and if so could they point me in the right direction?

Thank you,
Rocky
 
   / MT372D injector nozzle gasket #2  
I supply Mitsubishi parts. If you don't kno which is bad you should probably order both. I think they are fairly reasonable.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2018 MACK CHU613 PINNACLE DAY CAB (A53843)
2018 MACK CHU613...
Caterpillar Loader Quick Coupler (A53473)
Caterpillar Loader...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2015 Mitsubishi Outlander Sport SUV (A53424)
2015 Mitsubishi...
2025 Wolverine TQH-26-02C 3 point hitch (A53117)
2025 Wolverine...
 
Top