More Hydraulic Questions

   / More Hydraulic Questions #1  

joe swanson

Bronze Member
Joined
Jun 2, 2009
Messages
84
Location
Adirondack Mts, Fulton County , NY
Tractor
YM 336D
I have a 336D with a FEL and YM765 Back hoe. The Hoe is powered by a PTO pump. While the FEL loader uses the tractor Hydraulics. Why can't I use the tractor Hydraulics to power the BH in the same manner it is used to supply hydraulic power for the FEL loader.

Seems like a couple of T fittings and a few quick connect for the BH would allow the same supply and return to be used for the BH??

What am I missing.

Thanks

Joe
 
   / More Hydraulic Questions #2  
You can use the tractor hydraulics to run the backhoe. It may not be quite as fast. You do not want to use Tees. This will create a parrallel circuit . The oil will go to the circuit of least resistance. You need to plumb the backhoe in series with the loader & always make sure you hook the hose together when you remove the backhoe, so you don't wreck the tractor hydraulic pump.
 

Tractor & Equipment Auctions

2025 78in Dual Cylinder Hydraulic Grapple Rake Skid Steer Attachment (A50322)
2025 78in Dual...
2004 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2004 Big Tex 10PI...
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2014 MACK CXU (PINNACLE) (A50854)
2014 MACK CXU...
2004 Big Tex 10PI 18ft T/A Pipe Top Utility Trailer (A49461)
2004 Big Tex 10PI...
(INOPERABLE) CAT D4D (A50854)
(INOPERABLE) CAT...
 
Top