montgomery ward 7 hp garden tractor info
- Thread starter KeithRa
- Start date
- Views: 6334
davesl708
Elite Member
Nice looking tractor. My guess would be 70's model.
Maybe someone else on here will recognize it.
Good luck.
And welcome to the site
Maybe someone else on here will recognize it.
Good luck.
And welcome to the site
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
:welcome:
To the forum from Northwest Alabama. From what I found, they were made by Yard Man Co from 1965 to 1970. Yard Man Co became MTD and that is where you will find any manuals if the are available.
To the forum from Northwest Alabama. From what I found, they were made by Yard Man Co from 1965 to 1970. Yard Man Co became MTD and that is where you will find any manuals if the are available.
arnoldziffel
Gold Member
- Joined
- Jun 13, 2008
- Messages
- 368
- Tractor
- Branson 4225h, Mahindra 2516, several Toro Wheel Horse 522xi machines.
I'm NO expert, but GILSON BROTHERS, (a very good manufacturer), was a major Montgomery Ward supplier of lawn and garden power equipment for long time.
I may have read that Gilson was purchased by Ariens many years ago, but don't quote me!
I may have read that Gilson was purchased by Ariens many years ago, but don't quote me!
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
Yes, Gilson Brothers, WI, made tractors for Wards starting in 1970.
RandyT
Elite Member
I believe Gilson is owned by Lawnboy. Or at least there is some relationship.
I bought it to resell its to small for me to use. I got it running all I did was put fuel in it. The only thing I found wrong with it was someone was rough on the shifter and I think they broke the ball off the end of it. I'm going to take it off and repair it and find it a new home. I think I have to many garden tractors already. I have a 10hp case 155, 2 Massey 16 and 3 Massey 8.
