Mitsubishi MT250D Hydraulic question

[Brian KM]

Does anyone know what the GPM and the PSI is for the hydraulic pump on this tractor? It is a 3 cylinder, 25 horse power Ford with a 25 hp PTO as well. The manual says the hydraulic relief valve is set at 2300 PSI which makes me assume it is probably a 2000 PSI pump but I can't find anything on GPM. I am trying to figure out if it has the power & speed to run a 3 point hitch log splitter that I am eyeing.
Thanks!

 

[J_J]

You tractor can support 16 GPM at 2300 psi, but the attachment flow is probably about 8 GPM.

An equivalent Kubota would have about 6 to 8 GPM.

As far a funning a log splitter, answer is yes.

GPM determine the speed and pressure determine the force.

So if using a 4 in cyl with a pressure of 2300, the force would be about 14T.

If you wanted more speed, Prince makes an LSR log splitter valve that will use 4 GPM and make that into a 25 GPM log splitter.