Mitsubishi D1550 PTO Speeds

[stevesmit]

HI

I have have a Mitsubishi D1550 tractor, it has a 3 cylinder engine 6Fwd 2Rev transmision.

The PTO has 3 speeds can any some one advise what the speed ranges are, as I only have an RPM clock. How many PTO turns per engine rev is each gear?

I wish I still had a hand tach.

Oh by the way how many horses should be generated by my engine?

 

[kensnelling]

Can't help you on the pto speeds, other than to say 1st is your 540 at the rpm that should be marked on your tach. Horsepower would be rated15.5 at the pto, and 19 at the flywheel.

Ken

 

[kensnelling]

Can't help you on the pto speeds, other than to say 1st is your 540 at the rpm that should be marked on your tach. Horsepower would be rated15.5 at the pto, and 19 at the flywheel.

Ken

 

[stevesmit]

Thanks I didn't see any marking on the tach besided the actual RPM

 

[Freakingstang]

the three pto speeds are as follows

1=517 rpm
2=762 rpm
3=1250 rpm

1st being all the way on the bottom (or forward) and 3rd at the top or towards the rear of the machine,

 

[stevesmit]

Hi Satoh S2300

Thanks for the info, I have another question.

What engine RPM would give these pto RPMs

 

[Freakingstang]

sorry, at full throttle, or 2900 rpm

 

[stevesmit]

Cheers

Thankyou very much.

who would you suggest I contact for a manual?

 

[Freakingstang]

Try bill at valley power Valley Power

or lens12 at Japanese Tractor Repair Dixon, IL

they are both members here.

I was able to get a manual from a local dealer and copy it...