Millonzi Pix

[RedRocker]

After years of waiting and wanting the day finally came.

 

[Glowplug]

Nice lookin' grapple ya got there! I can see you've already put it to work. Don't "work" too hard!
Now you need a grapple pic for your avatar!

 

[BamaRob]

I've put maybe 3 hours on my grapple so far. And, I've piled at least 30 hours worth of brush (if I were piling by hand). I already feel that my Millonzi grapple is the best implement investment I've made to date.

BR

 

[RedRocker]

Nice lookin' grapple ya got there! I can see you've already put it to work. Don't "work" too hard!
Now you need a grapple pic for your avatar!

Done!

 

[BamaRob]

Done!

I added a grapple pic to my avatar, also.

BR

 

[Mr Grizz]

I am still waiting for my grapple to come in.

 

[RedRocker]

I am still waiting for my grapple to come in.

Man they're neat, I was bush hogging and had a big rock in front of me, lowerd the grapple and clamped down on it and kept on truckin!!

 

[PaPaGus]

After years of waiting and wanting the day finally came.

RedRocker, I to am in the process of choosing a Grapple and your setup looks great. If you don't mind can you give me the name of the hyd hook and Grapple you have?
Also, what size, and weight is that Grapple?

Thanks

 

[BamaRob]

I know you didn't ask me, but I've been documenting my grapple install here. I have the Millonzi LD-48 Grapple and WR Long Electric Hydraulic Valve to control it. Many here have chosen the Millonzi for it's lighter weight (better suited to our compacts) and affordable price. Links to both Millonzi and WR Long are on the first page of my install documentation.

I owe a debt of gratitude to IslandTractor (and others here) for helping me decide on the Millonzi. I only have about 4-5 hours on mine thus far, but they've been very productive hours. I'm looking forward to years of productive service.

Good luck,
BR

 

[RedRocker]

Hey Gus, Bob has the same setup, 48" Millonzi with the Long diverter valve.
I used a switch from Otto engineering rather than the one from Long though.


Millonzi International Homepage
Otto Engineering

 

[PaPaGus]

Hey Gus, Bob has the same setup, 48" Millonzi with the Long diverter valve.
I used a switch from Otto engineering rather than the one from Long though.


Millonzi International Homepage
Otto Engineering

First Thank You guys for the reply. Would it be possible to post a picture of where you mounted the valve on your CK 30?

THank you
Bruce

 

[PaPaGus]

I have ordered my LD 48 Grapple from Millonzi and the diverter valve from WR Long. You couldn't ask for easier and more helpful people to work with.
Now the waiting starts, but I bought a landscape rake to keep me busy.
Bruce

 

[BamaRob]

I think you'll be pleased. Keep us posted and be sure to change your avatar after you get the grapple mounted.

Later,

BR

 

[DannyLobster]

I have ordered my LD 48 Grapple from Millonzi and the diverter valve from WR Long. You couldn't ask for easier and more helpful people to work with.
Now the waiting starts, but I bought a landscape rake to keep me busy.
Bruce

They'll probably ship it on the same truck as mine!

 

[PaPaGus]

They'll probably ship it on the same truck as mine!

Danny, just wondering...did you receive your grapple yet?

Bruce

 

[yekrut]

RedRocker - Congrads on the Grapple. I'm picking my LD 48" Millonzi up tomorrow. L39 arrives Thursday. The folks at Millonzi timed things pretty well. Want to make sure everything is good to go when the L39 shows up Thursday. Will keep you posted.

 

[NHbotanut]

I just dropped off my Kubota to Nashua Power to have my grapple installed. I decided on the WRLong RBG2-48 Grapple and Valve kit.

I am supposed to pick it up on Friday. Can't wait!!!! I've been making all kinds of little piles around the house. Been waiting for my other attachments to come in so I can some start some serious land clearing.

 

[DannyLobster]

Danny, just wondering...did you receive your grapple yet?

Bruce

Yes. finally!
The messed up the order and did not process it until last week but it finally came and it was worth the wait.

http://www.tractorbynet.com/forums/...182735922-grapple-gc-2310-grapple_010comp.jpg

Did you get yours?
What did you set up for the hydraulics?
Dan

 

[yekrut]

Been meaning to post but have been doing quite a bit a clearing since Friday. Anyway, here's a pic of the Millonzi LD 48" on my new L39.

 

[PaPaGus]

Yes. finally!
The messed up the order and did not process it until last week but it finally came and it was worth the wait.

http://www.tractorbynet.com/forums/attachments/massey-ferguson/79840d1182735922-grapple-gc-2310-grapple_010comp.jpg

Did you get yours?
What did you set up for the hydraulics?
Dan

Looks Great and kinda mean ... I received mine on Saturday and just waiting for a couple fittings. Lines on the Grapple came with 1/2 " male ends and my quick connects are 3/8. I have it on the tractor and can't wait to pick up the mess I made.