Millonzi grapple and CCM toplink won't work togeter

[mscheer772]

My grapple will not work when the toplink is hooked up. I had plumbing run for the grapple, but must disconnect the lines from the back of the tractor, and connect the hose from the CCM toplink to get the toplink to work. Why can't these be operated at the same time? If they can, how can they?

I'm confused, I can operate the loader with the toplink connected, but not the grapple.

HELP!!!!!!!!!

-Mike the hydraulphopic-

 

[bjcsc]

How is it plumbed?

 

[smitty9266]

As I understand it you are using your rear remotes to run the grapple. If this is true you can use one of these Hydraulic Diverter Valve, SCV, Selective Control Valve - (eBay.ca item 320191525564 end time 29-Aug-08 16:51:11 EDT) to split your rear remotes into two circuits.

Plugs in remotes you run the wire to 12v supply and a switch, flip switch changes which set of remotes works.

Or....you could install a wr long electric over hyd valve Valve Kits

Jeff

 

[kernal]

I just received a WR Long Selector valve kit. Give WR Long a call and ask for Nelson, I'm sure he can help you get what you need.