MIE 3rd function kit , installed CK2610, getting no pressure to grapple..HELP please

jsrore1 · May 23, 2020

ALL,
just installed the kit yesterday getting no hyd pressure to the grapple. when i press the control the LED (red) lights up on the solenoid no hyd oil to the grapple. i can feel it click

other then 2 hoses were cut too short, it seems to be pretty simple set up....remove 2 hoses from the FEL block RED/BLUE connect to there valve, run the 2 hose from the valve back up to the FEL block. then quick disconnect hoses up to the grapple .

then hook up the electrical ....

any suggestions are appreciated...

jeff

jsrore1 · May 23, 2020

just wanted to let every know that COMMON SENSE intervened MIE emailed me back it was all me ...just have to know how to operate the joystick and button at the same time..

works great.....

Highgear · May 24, 2020

So what was the answer ? Incase it happens to someone else ?

jsrore1 · May 26, 2020

Well it was mostly common sense i assumed you just pulled the trigger "boom" it opens...no ..pull the trigger pull joy stick left or right to open and close...makes sense after thinking about it.
i wish they would have put that in the directions, but i also feel stupid i did not think about it.
i will say the kit was easy to hook up. other then 2 hoses being about 2 inches too short cost me about 60 to get the hoses made.

justman777 · May 26, 2020

Hmm... I wouldn't think that was a common sense issue. On my Kioti branded third function, I have two buttons to push and they operate independently of the loader control. I wouldn't have thought to move the loader control one way or the other to actuate the third function.