I have an early 60's MF302 which has seen some long hard years work. One of the front wheels is now being held on by about 1 1/2 lugs and I am trying to figure a way to fix it. This machine has the original heavy cast hub and I'm wondering if it is possible to drive out the old broken lug bolts and replace them or if I may have to drill them out and tap in new bolts. Any advice would be appreciated.
MF302 front wheel lugs
- Thread starter ADKMF
- Start date
- Views: 923
The kid
Elite Member
- Joined
- Apr 25, 2012
- Messages
- 3,888
- Location
- Middle Tennessee
- Tractor
- 1965 135 gasser, 1967 135 diesel
I have a 65 135 and on mine the bolts press in from the back. Part number 181328M1
You might cruise over to agcopartsbook.com and look up your tractor to see an exploded view of the front hub. The site will give you parts numbers and well as a printable view of the assembly. If you don't have a MF dealer close by you can Google one and have them shipped to your door. BTW Welcome to TractorByNet.
You might cruise over to agcopartsbook.com and look up your tractor to see an exploded view of the front hub. The site will give you parts numbers and well as a printable view of the assembly. If you don't have a MF dealer close by you can Google one and have them shipped to your door. BTW Welcome to TractorByNet.
