Max28 Mower Driveshaft

   / Max28 Mower Driveshaft #1  

mitchash

Gold Member
Joined
Mar 24, 2006
Messages
380
Location
Greene, NY
Tractor
Mahindra MAX 28XL, Jinma 254 (Sold)
I have a 2014 Max28XL with the 60” deck. I messed up the driveshaft on the mower mowing too high grass. I was told by the Mahindra dealer it would be $1000. to replace! I took it to a drive line rebuilder and they didn’t want to mess with it. Said they couldn’t get parts. I could fix it myself if I could find a universal joint with 1” bore on one side and 3/4” on the other. Anyone have any suggestions on where to get the part? Thanks
 
   / Max28 Mower Driveshaft #2  
Ouch, $1000 is a lot. Not sure if you have a keyed, splined or smooth bore shaft, but replacement joints are out there. Here’s some keyed yokes in the right size at Tractor supply. Grainier has a good supply, but pricey, around $400.
 

Attachments

  • IMG_0096.png
    IMG_0096.png
    664.5 KB · Views: 29
   / Max28 Mower Driveshaft
  • Thread Starter
#3  
One is 3/4” smooth bore welded to shaft. The other is a 1” smooth bore that has a shear bolt through it.
 

Tractor & Equipment Auctions

2018 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
LOAD OUT INFORMATION (A53084)
LOAD OUT...
Quick Attach 84" Push Blade (A50121)
Quick Attach 84"...
16ft T/A Flatbed Equipment Trailer (A50322)
16ft T/A Flatbed...
Deere 317G (A50120)
Deere 317G (A50120)
2019 Ford F-350 XL (A50120)
2019 Ford F-350 XL...
 
Top