Massey Furgesson GC2610 TLB Flashers not working

[CashTango]

Good day. I have the above tractor and recently noticed that the flashers do not work. I hear the flasher unit clicking, but no rear lights. Tractor is not abused and used for what I would consider normal homeowner tasks. Checked the wiring harness and no tears, rips or scrapes. Fuses all meter ok. Bulbs meter ok as well. I do have a good ground to the lights as the tail lights work great. No voltage (monentary) to the turn signal or flasher bulbs. Also this tractor appears to have stop lights and they do not work either. I want to say the flasher finally went bad but would like additional opinions or recommendations before proceeding. Any assistance would be greatly appreciated.

 

[seville009]

This thread might be of some help/insight......

GC2610 Four Way/Signals Not Working One Side

Hi All, Was clearing snow for the first time the other night and since I was near the road for the first time I thought I would turn on the four ways. I think they worked okay for a little (not 100% sure) but at one point I looked down and noticed that the LHS dash indicator was stuck on and...

www.tractorbynet.com

 

[CashTango]

This thread might be of some help/insight......

GC2610 Four Way/Signals Not Working One Side

Hi All, Was clearing snow for the first time the other night and since I was near the road for the first time I thought I would turn on the four ways. I think they worked okay for a little (not 100% sure) but at one point I looked down and noticed that the LHS dash indicator was stuck on and...

www.tractorbynet.com

I did find that one and I guess that will be what I need to try and replace. Just wanted to make sure I there were no other recommendations. Thanks for the input.