Thank you for the add. I would like to post a question regarding my Massey 250.
Hydraulics slowly stopped working. I changed the fluid and cleaned the filter (both were very dirty). They hydraulics worked for a few minutes then failed, and the low pressure warning light came on.
I assumed my pumps were bad, so I replaced both the primary and auxiliary pumps. Again, I had pressure for about a minute, then lost it. My PTO shaft turns when engaged, so I am assuming I do not have drive shaft or 2 stage clutch problems. I'm uncertain where to check next. Seeking advise please. Thank you in advance.
Hydraulics slowly stopped working. I changed the fluid and cleaned the filter (both were very dirty). They hydraulics worked for a few minutes then failed, and the low pressure warning light came on.
I assumed my pumps were bad, so I replaced both the primary and auxiliary pumps. Again, I had pressure for about a minute, then lost it. My PTO shaft turns when engaged, so I am assuming I do not have drive shaft or 2 stage clutch problems. I'm uncertain where to check next. Seeking advise please. Thank you in advance.
