Archy
New member
- Joined
- Mar 9, 2008
- Messages
- 19
Hey folks. Been lurking around here for a few months researching my first (and hopefully last
) tractor purchase. Recently bought 10 acres I plan to build on, about 6-7 of it open with lots of scattered trees, the rest wooded. The land is fairly tamed now (had cows on it), just a lot of old downed trees and limbs to pick up, and a bit of brush cleanup along fence lines to do. A few slopes, but nothing bad. Attached are a couple of pics.
I'd say my primary use will be mowing with a rotary cutter, other uses will be front loader work for the standard stuff like moving dirt, spreading gravel, toting stuff, etc. I'll get a box blade for leveling out a few spots and maintaining a future driveway. Would like to eventually pick up a tiller, and possibly a post hole digger, but those will come later.
I've settled on hydrostatic and industrial tires, and have pretty much narrowed my options to the MF 1531 or NH TC31.
I've got the following prices from one dealer.
MF 1531 w/ loader $18,000 financed. (0% for 60mo.)
NH TC31 w/ loader $19,300 financed. (not sure the rate/terms)
Do these prices look reasonable? Which way should I go? Thanks.
I'd say my primary use will be mowing with a rotary cutter, other uses will be front loader work for the standard stuff like moving dirt, spreading gravel, toting stuff, etc. I'll get a box blade for leveling out a few spots and maintaining a future driveway. Would like to eventually pick up a tiller, and possibly a post hole digger, but those will come later.
I've settled on hydrostatic and industrial tires, and have pretty much narrowed my options to the MF 1531 or NH TC31.
I've got the following prices from one dealer.
MF 1531 w/ loader $18,000 financed. (0% for 60mo.)
NH TC31 w/ loader $19,300 financed. (not sure the rate/terms)
Do these prices look reasonable? Which way should I go? Thanks.