Rotary Cutter Mahindra Cutter Gearbox

[Mulemamma]

I cannot find a manual on the Mahindra cutter I bought a couple years ago. I really need to check the oil in the gearbox. I'm totally new to tractors & implements. There is a top side screw that comes out to apparently check the oil. I stuck my finger in & felt no oil. Is this where I fill it? Pretty confusing without a manual.
Thanks.............Mulemamma

 

[SPYDERLK]

If its about 1/3 of the way up from the bottom, yes. Fill to the hole with the box level.
larry

 

[KYDan]

Here is a link to the Kodiak site. I believe their rotary mowers are manufactured by Mahindra. This is a link to the manuals for the rotary mowers, you can download and save the manual or print it if you want. KODIAK MFG., Inc.

 

[bullbreaker]

80/90 WT OIL

Boone

 

[Mulemamma]

I'll check this out....thank you!

 

[Mulemamma]

Let me take a big guess here....the manual is not very informative; the bolt on the top side of the gearbox is labeled the pressure/relief valven (prv) and assume it is the fill/empty hole; therefore, I fill (on a level surface) to where it runs out the bolt hole/prv. Okay another question, there is a grease fitting on the pto that hooks up to the clutch that is a 45 degree fitting, but almost entirely impossible to get the flex grease gun onto. It really needs a 90 degree fitting, but no way to get to it to exchange it out. What can I do? I've tried posing questions to the dealers via phone, but they don't seem to be able to answer my questions. Thanks............