Front-End Loader Mahindra 3016 Loader Stand

   / Mahindra 3016 Loader Stand #1  

stancel

New member
Joined
Sep 7, 2016
Messages
17
Location
Slidell, La
Tractor
Yanmar YM2000
I bought a used Mahindra 3016 with the ML115 loader. Didn't notice until weeks later that the parking leg for the loader wasn't there. I can get a new one for $80, but if somebody has one and can give the pipe o.d. and length I will try and fab one.

Any help is appreciated.

Stan
 
   / Mahindra 3016 Loader Stand #2  
I have the 115 loader and the stand is 1 7/8 od tube 28 inches to top of base. base appears to be about 3/16 plate that is roughly 3" x 5" will add the pin hole location when I get home
 
   / Mahindra 3016 Loader Stand
  • Thread Starter
#3  
Thanks man! That is much appreciated.
 
   / Mahindra 3016 Loader Stand #4  
The pin hole is 3" down from the top. And appears to be 5/8 is of an inch.
 
 

Tractor & Equipment Auctions

Bush Hog 84in Rotary Cutter (A50322)
Bush Hog 84in...
TRUCKING INFO (A50775)
TRUCKING INFO (A50775)
Wolverine Quick Attach Hydraulic Winch (A50514)
Wolverine Quick...
UNUSED JCT DUSTLESS BLASTER (A51244)
UNUSED JCT...
UNUSED CFG KRW232 WHEELED SKID STEER (A51243)
UNUSED CFG KRW232...
LOT LOCATIONS (A52577)
LOT LOCATIONS (A52577)
 
Top