M9540 3PH Problem

   / M9540 3PH Problem #1  

KEEPBALINTX

New member
Joined
Jun 9, 2014
Messages
18
Location
Wharton, TX
Tractor
Kubota 9540
I can't slide the telescoping part of the right lower arm all the way in and it won't engage the pin. I tried scraping out all the dirt I could from the inside but it still won't retract all the way. Anybody got an idea? The left side is fine.

Thanks in advance.

Jeff
 
   / M9540 3PH Problem #2  
Have you tried working some oil into it to free it up? Not many Kubota M9540 owners on TBN that I can recall. Mind posting some pictures?
 
   / M9540 3PH Problem
  • Thread Starter
#3  
Have you tried working some oil into it to free it up? Not many Kubota M9540 owners on TBN that I can recall. Mind posting some pictures?

Well actually I had completely disassembled it to clean it out so it was free but anyway I just took it apart again and really scraped it hard with a pointed tool and more rusty dirt came out and was enough to fix it.

Thanks for the help.

Jeff
 
   / M9540 3PH Problem #4  
Well actually I had completely disassembled it to clean it out so it was free but anyway I just took it apart again and really scraped it hard with a pointed tool and more rusty dirt came out and was enough to fix it.

Thanks for the help.

Jeff

Good news. Can we still get a picture?
 

Tractor & Equipment Auctions

2005 Chevrolet C4500 Altec Bucket Truck (A50323)
2005 Chevrolet...
2004 JOHN DEERE 5205 TRACTOR (A51406)
2004 JOHN DEERE...
ABB Rotterdam Air Compressor (A49461)
ABB Rotterdam Air...
2019 Club Car Carryall 1700 4x4 Diesel Utility Cart (A48082)
2019 Club Car...
Willmar 4300 Wrangler Loader (A51039)
Willmar 4300...
2017 Ford F-550 Ext. Cab Valve Maintenance Truck (A50323)
2017 Ford F-550...
 
Top