M50 Tank versus Z-Force 50

[OldMachinist]

I pull around a tank sprayer and garden wagon with my Z-Force 50. I used a hitch plate from a old Sears sleeve hitch adapter plate. There are two holes from the factory in the middle of the frame and the muffler is no problem with the Kohler Command.

 

[OldMachinist]

I pull around a tank sprayer and garden wagon with my Z-Force 50. I used a hitch plate from a old Sears sleeve hitch adapter plate. There are two holes from the factory in the middle of the frame and the muffler is no problem with the Kohler Command.

 

[Fordlords]

This was just looking at TSC, but the ones with V-twin Kohler Commands and the Kawasaki V-twin engine could easily have hitch plates made for them. If I'm not mistaken it was the Kohler Courage 17 single cylinder Z-Force that had the big muffler in the spot where you would ideally want a hitch.

-Fordlords-

 

[Fordlords]

This was just looking at TSC, but the ones with V-twin Kohler Commands and the Kawasaki V-twin engine could easily have hitch plates made for them. If I'm not mistaken it was the Kohler Courage 17 single cylinder Z-Force that had the big muffler in the spot where you would ideally want a hitch.

-Fordlords-

 

[clemsondave]

And I thought I went overboard getting a Z50 for one acre! Get the Z50. I can cut mine in 25 minutes.

 

[clemsondave]

And I thought I went overboard getting a Z50 for one acre! Get the Z50. I can cut mine in 25 minutes.

 

[grass_slayer]

Thanks to all that replied to my post. I am leaning toward the Z Force 50 - now to convince the better half...

 

[grass_slayer]

Thanks to all that replied to my post. I am leaning toward the Z Force 50 - now to convince the better half...