LW8 Backhoe gland and rod seal sizes

   / LW8 Backhoe gland and rod seal sizes #1  

DonRina

Bronze Member
Joined
Feb 6, 2024
Messages
61
Location
Vancouver Island
Tractor
Jinma 354
Just replaced my LW8 backhoe seals but NOT including the main rod seals which I couldn’t remove and seemed in decent shape anyway. For those replacing the rest being: rod o ring under the rod piston, both gland large o rings, gland wiper and the gland U cup oil seal (most important), See the accompanying photo for the sizes. I ended up ordering from easy seal in Canada. Note the rod end o ring is 2.5mm, hard to see. I advise checking your seals against these measurements just in case of variations.

BTW, free apps for sizing o rings are available which is what I used like Olypsys.

Cheers,

Don B


IMG_1443.jpeg
 
   / LW8 Backhoe gland and rod seal sizes
  • Thread Starter
#2  
Slight update for the o rings on the lw8 hydraulic lines to cylinder seals. Mine measured 8x2 size.
 

Tractor & Equipment Auctions

2012 Ford Focus Sedan (A46684)
2012 Ford Focus...
2021 Chevolet Tahoe SUV (A46684)
2021 Chevolet...
2012 DODGE Ram (A46684)
2012 DODGE Ram...
John Deere 3pt Cultivator (A49251)
John Deere 3pt...
Wolverine Hydraulic Tiller Skid Steer Mount (A47371)
Wolverine...
Tine Weeder (A49251)
Tine Weeder (A49251)
 
Top