centex
Gold Member
<font color="blue">3rd scv's are easy to install, on large frame models even easier</font>
If you have the subframe for the backhoe installed it is very difficult to route the tubing from the control valve to the rear connectors. The BH subframe just takes up all of the free space. It took me around 2 hours just to get the tubes installed on a 4700 and I was ready to give up more than once. I still don't know how I finally got them in but the rest of the job was easy. The instructions that JD supplies for this kit calls for more disasembly than is really required.
If you have the subframe for the backhoe installed it is very difficult to route the tubing from the control valve to the rear connectors. The BH subframe just takes up all of the free space. It took me around 2 hours just to get the tubes installed on a 4700 and I was ready to give up more than once. I still don't know how I finally got them in but the rest of the job was easy. The instructions that JD supplies for this kit calls for more disasembly than is really required.
