traderfjp
Silver Member
I lost two Lynch pins on my bucket. Does anyone know what size the Lynch pins on the bucket are? Also are all the other lynch pins on the tractor the same size. Thanks in advance.
LS MT125 Lynch Pin Size
- Thread starter traderfjp
- Start date
- Views: 2387
Diggin It
Super Star Member
I picked up a couple of assortment packs from the various ag/tractor big box stores, plus I grab a few singles each time I go in. Can't answer your question directly, but when I need a pin, I reach into the box and grab whatever fits.
That said, they really shouldn't come out of the loader pins, unless you just took them out and lost them.
That said, they really shouldn't come out of the loader pins, unless you just took them out and lost them.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,655
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
I believe they are 1/4 inch. I lost a couple of the factory ones. Once I replaced them with the ag store ones, they did not come out any more. Seems like the springs on aftermarket ones are stronger keeping the rings tighter.
