Looking for new FEL control valve

[NewClimber]

I have a B7100, with a B219 FEL. I am looking for a new control valve and wanted to ask if this would do?

Directional Control Valve | Agri Supply

http://www.agrisupply.com/images/xl/82587.jpg

I like the stick kind where I currently have the one with two levers of which the float does not work. I attempted to take it apart using the many insturctions that I read here, but it is so rusted, I am in need of a new control valve....just not sure what will work. If it is not a direct bolt on, that is OK, just want to make sure everything else will work.

Thank you for the help

 

[BeezFun]

You want to match the flow and pressure settings of the old and new valve. Also figure out if old valve is open or closed center and match the new one. Why don't you call a place like Surplus Center, they'll help you match the right valve and their prices are good.

 

[Harry in Ky]

You don't want that valve. Look for something smaller, like a 10 gpm valve and look for one with O ring ports, not pipe thread. Pipe thread is much more difficult to work with and will always have leaks somewhere. Your present valve is most likely O ring ports. You can get a joystick valve from Bailey Hyd. for about the same price that will suit your needs far better than the one you mentioned.