Looking for a shop manual for a Kubota L4400

   / Looking for a shop manual for a Kubota L4400 #1  

Bobsoldit

New member
Joined
Jan 4, 2020
Messages
5
Tractor
John Deere 970, Kubota L4400
Anyone willing to share a shop/service manual for a L4400?
 
   / Looking for a shop manual for a Kubota L4400 #2  
Sure would have I had one. I've got several electronic manuals, but not that one. Sorry.

Welcome to TBN.
 
   / Looking for a shop manual for a Kubota L4400 #3  
Kubotabooks.com

Choose your poison :)

It does have the Operators and Parts manuals but I didn't found a Workshop manual.
 
   / Looking for a shop manual for a Kubota L4400 #4  
Are there any really good shop manuals out there? Sure, sometimes any information is good information, but I find both Kubota and JD shop manuals less than perfect.

I often find they tell you the hard and long way to do something when there is an easier way.
 
   / Looking for a shop manual for a Kubota L4400 #5  
A branded manual always tells you their interpretation of the proper method. Sometimes there are shortcuts. Those shortcuts are almost always best left to the experienced. The inexperienced will do more damage than good. So,,,, the manual is written to the less experienced.
 
   / Looking for a shop manual for a Kubota L4400 #6  
Not meaning to hijack, but a wheel bearing was bad on my E-gator. Manual says to remove batteries and whole transaxle. A days job. I jacked it up, took off the wheel, took off a retaining ring and the shaft and bearing came out. Maybe fifteen minutes.
 
   / Looking for a shop manual for a Kubota L4400
  • Thread Starter
#7  
I知 trying to get the front ring and pinion gears out. Theyæ±*e toast and I can稚 figure out how to remove them.
 
   / Looking for a shop manual for a Kubota L4400 #8  
Go to Kubota's website and do a parts search. In that process you'll see illustrated parts diagrams. By careful study you'll be able to see how it's assembled. As in snapring locations, etc.
 
   / Looking for a shop manual for a Kubota L4400 #9  
Not meaning to hijack, but a wheel bearing was bad on my E-gator. Manual says to remove batteries and whole transaxle. A days job. I jacked it up, took off the wheel, took off a retaining ring and the shaft and bearing came out. Maybe fifteen minutes.

JD was just trying to help out their workshops profit margin. :D
 
   / Looking for a shop manual for a Kubota L4400 #10  
I知 trying to get the front ring and pinion gears out. Theyæ±*e toast and I can稚 figure out how to remove them.

I just browsed the Kubota Parts Illustrated Parts Lists. Very good pics showing how it's assembled. You should be able to figure it out from those.
 

Tractor & Equipment Auctions

2019 Harley-Davidson FLHTP Police Electra Glide Motorcycle (A50324)
2019...
2005 Pierce Enforcer Special Operations Fire Truck (A50323)
2005 Pierce...
1996 Lincoln Town Car Signature Sedan (A50324)
1996 Lincoln Town...
2005 Chevrolet Uplander Van (A51694)
2005 Chevrolet...
2003 John Deere 270 Series II Compact Wheel Loader Skid Steer (A50322)
2003 John Deere...
2020 Kubota BX2380 (A50120)
2020 Kubota BX2380...
 
Top