Looked at a new Yanmar YT235 this afternoon.....

[holtza]

cut out some brackets on my cnc plasma table for the quick connect on the front end, going to build a fork attachment.

 

[rockyridgefarm]

soon as I get the part numbers I am going to see which and if my local parts stores can cross them and get them.
oil filter PN. 129150-35160
hydraulic line filter PN. 1A7180-48191
hydraulic transmission filter PN. 198119-48310
page 13-6 in the owners manual.
Good luck and let me know if you find them at ANY local parts store.

If that is correct - they are around $27 all over at places like Amazon, Summit, etc.

 

[holtza]

So is it a standard filter ? nothing special ?

 

[rockyridgefarm]

In warranty, I'd consider a $56 Yanmar filter. Maybe. But, more than likey go with Wix. I used them on most things and have never had an issue.

I haven't actually checked it for fit on a Yanmar, of course.

 

[holtza]

Just talked to NAPA and they have the oil filter but not the other ones.

 

[rockyridgefarm]

1A7180-48191 Hydraulic line filter shows to be $188 from Yanmar - no cross that I have found. I wonder how many hours it is good?

 

[Geosankie]

Service rep for our area says the Line filter in the Maint kit box is PN. 1A7180-48210 (as shown on his parts diagram)

 

[rockyridgefarm]

Service rep for our area says the Line filter in the Maint kit box is PN. 1A7180-48210 (as shown on his parts diagram)

That looks like $109 for Yanmar - still no Wix cross.

Weingartz is one place that keeps popping up when I search:
Weingartz.com

 

[holtza]

I was going to build a set of forks but came across a set that I am going to buy, so I guess I will build me a snow plow instead.

 

[Tractorable]

View attachment 511895
here she is

She's a real beaut holtza, congrats!