LOOK at these sexy curves on this little girl! *DELETED*

[Donnyj]

Re: LOOK at these sexy curves on this little girl!

For that "type" of delivery, just buy the tractor to. /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif

 

[JayC]

Re: LOOK at these sexy curves on this little girl!

<font color="orange"> This is a 4 point mount and you can also run a mid mount mower with it. </font>

What do you mean by 4-point mount? Does it have a subframe? If it does, how can it be used with a MMM? Again, if it does, how low does it hang as opposed to the Kioti brand hoe?

 

[KiotiJohn]

Re: LOOK at these sexy curves on this little girl!

</font><font color="blue" class="small">( What do you mean by 4-point mount? )</font>
There is a subframe that stays with the tractor. The BH is set into two hooks on the bottom and then moved into two pins at the top. When it's removed, the subframe part stays connected and rides several inches higher that the Kioti subframe.

I would say it takes just a bit more maneuvering to get on and off, but not much. The way it's built, the MMM can still be used as opposed to the Kioti subframe setup, since all of the backhoe part comes off, there is no need for the Kioti replacement rear mount where the drawbar goes.

The Woods is a lot easier to load onto a trailer with that higher rise.

John

 

[JayC]

Re: LOOK at these sexy curves on this little girl!

That must tuck up there quite nicely then. How do they get the subframe up far enough to allow for the MMM to be used?

 

[KiotiJohn]

Re: LOOK at these sexy curves on this little girl!

</font><font color="blue" class="small">( That must tuck up there quite nicely then. How do they get the subframe up far enough to allow for the MMM to be used? )</font>
It's just a difference in the way the subframe attaches. The Kioti has two front braces that extend down at the bottom of the loader frame up front, and the drawbar mount is replaced in the back with one that has a lip for the backhoe to slide into, which is lower. The Wood's frame work attaches higher up without the low extensions in the front. Now, I haven't seen an MMM work on one, but I can see why it could as I've seen this backhoe setup on a CK20 with Woods' loader and backhoe. Wallace is the one who has experinece with the MMM working, and I trust his statements.
John

 

[dfkrug]

Re: LOOK at these sexy curves on this little girl!

So, Wallace.....

As a Kioti dealer, why are you selling the BH80-X and not the Kioti hoes? Or are you selling both? And why would Kioti care if you quoted Woods pricing here?

Does Woods now have the 4-pt subframe for CK30s?

Anyway, sweeeet....

 

[Highbeam]

Re: LOOK at these sexy curves on this little girl!

A good dealer will sell the best product even if the best product is not the same brand as the tractor. At least it is orange and looks dang stout.

 

[wallace]

Re: LOOK at these sexy curves on this little girl!

</font><font color="blue" class="small">( So, Wallace.....

As a Kioti dealer, why are you selling the BH80-X and not the Kioti hoes? Or are you selling both? And why would Kioti care if you quoted Woods pricing here?

Does Woods now have the 4-pt subframe for CK30s?

Anyway, sweeeet.... )</font>
As a Kioti dealer I sell Kiotis full line of equipment and attachments. As a Tractor and Equipment dealer I sell over 5 different brand backhoes and I also carry over 50 manufactures products, I guess you can call me a full line dealer.
there are some manufactures that do not have the ability to attach a loader backhoe and a mower all at once so that is one big reason for have other manufactures to fill in what a customer wants
I do like to give the customer what he or she wants.
As far as the price I do not like to give out prices unless they are thru a pm because then it looks like I am advertising on this site.
Yes woods has the 4 point mount for the CK25 and 30
The picture you saw was the new Woods 80 on a CK30 hung by woods 4 point mount