LONGEVITY Customer Appreciation on TractorByNet February 2012

longevity · Feb 1, 2012

THANK YOU!

Tractor Members,

As we signed on to support the forum this year, we are and will be offering Tractor Member appreciation every month! What is this all about? Well, every month, we will give 40% off to the first customer on Tractor By Net with 50 or more posts, and who is a member at least for 3 months.

So if you are interested in saving 40% off most items at Welding Machine, Welder, Welding Supplies, Welders, Welding Equipment, be the FIRST to reply to this thread and the FIRST to pay.

We will require you leave a review of the product on TractorByNet in our Sticky Thread and in the Welding Section (you will need to create a new thread)of the Tractor Forums within the month of receipt. You can update your review any time as long as you own the product!

Terms:

This offer does not apply on the following models, WeldAll 256pi, Stickweld 140, Runner Packages, and will not apply to past orders. The discount is taken from the sale price on our website. Cannot be combined with any other offer. Only one item per customer. You must keep the product for a minimum of 6 months. Shipping and handling is not included. Standard Warranty Applies. While supplies last. Check out our terms and policy at Welding Machine, Welder, Welding Supplies, Welders, Welding Equipment for return/refund/shipping information and warranty.

Scotty Dive · Feb 1, 2012

I am in! I just bought the Weld Max 164i....HOLY COW~~~~~

Who has one of these and can tell me how it is???

Lawnman TX · Feb 1, 2012

I'm going to post more to get my count up.

5030 · Feb 1, 2012

Must be a new container load arrived......:laughing:

longevity · Feb 2, 2012

Scotty,

Thanks for the order. LONGEVITY will offer these at the beginning of every month and we do this on all forums we sponsor!

For all questions regarding products, please post in our sticky thread section so we can better track and respond faster.

Thanks Scott for the order!

Simon

Scotty Dive · Jul 9, 2012

Simon - and others...

I FINALLY got 220 out to my garage and fired up the plasma....and I have a few questions that I had trouble finding the answers to:

The first is eye protection - I used my auto darkening helmet but it seemed too dark for using with plasma.....what is the recommended shield to be used?

Secondly, is there a chart that tells me what amerage to use on different metals/thickness? The machine was set on 26 amps and I cut some very thin to 1/4" steel.

And, is there a video or pictures of what the cutting torch should look like when it need to be changed (consumables) or a way to know when it needs to be changed?

longevity · Jul 9, 2012

Hi Scotty,

We recommend you use an AUTO-DARKENING helmet with Grinding mode. We have these in stock and they allow for better visibility. If you do not want to spend the extra money to protect the face and eyes, you can use dark sunglasses or even working glasses that are tinted.

There is no chart that we currently offer, but the rule of thumb is start at max amps and turn down on test cuts to pro-long your duty cycle while still getting the maximum cut quality. Generally, 30amps is fine to cut most metals!

There are videos on our youtube channel, but you can also talk with Tim who is pretty knowledgeable with plasma cutting. If you want dial him at Extension 210

Anything else, let me know!

Simon